Type | Monster Truck |
---|---|
Height | 241 mm |
Scale | 1:10 |
Length | 459 mm |
Width | 324 mm |
Wheelbase | 270 mm |
Ground clearance | 100 mm |
Weight | 1850 g |
Battery compartment | 164 mm x 46 mm x 26 mm |
Drive | 2WD |
Engine | brushed Titan 550 |
Speed | Up to 48 km/h (with optional gear), stock gearing 30 km/h |
Driving time | 25 - 30 min |
Chassis | Composite Nylon |
Front wheels | Tires Terra-Groove 2.2″ |
Use | Servo for cars |
---|---|
Management | Digital |
Power voltage | 4.8 - 6.0 V |
Dimensions | 20.3 x 40.6 x 36.3 mm |
Weight | 45 g |
Moment | 6.2 kg.cm @ 6.0 V |
Speed | 0.20 s/60° |
Transfers | Nylon |
Bearings | No |
Engine type | Brushed |
Futaba S.BUS | No |
Connector | Universal Futaba |
Tisícihran | 25T |
Cable | 30 cm |
Weight | 209 g |
---|---|
Connectors | kolíky 4 mm |
Number of poles | 2 |
Number of threads | 12 |
Speed | 7500 ot/min/V |
Maximum supply voltage | 3 články LiPo |
No-load current | 3,7 A při 7,5 V |
Internal resistance | 40 mΩ |
Efficiency | 80 % |
Dimensions | ø36 x 57 mm |
Shaft | ø3,175 x 16 mm |
Type | Brushed |
---|---|
Use | Cars |
Power supply | 4-8 cl. NiMH, 2S LiPol |
Current | 14 A (continuous) |
BEC | Linear 6 V / 1 A (continuous) 2 A (short-term) |
Length | 55 mm |
Width | 31.2 mm |
Height | 16 mm |
Weight | 70 g |
Waterproof | Yes |
Input for sensors | No |
Thermal protection | Ano |
PWM frequency | 1400 Hz |
Maximum continuous current | 14 A |
Internal resistance | 7 mΩ pro směr vpřed, 14 mΩ pro zpátečku |
Minimum number of threads | 12 |
Ochrana proti podvybití LiPo | 2-Stage indicators, switchable (on or off) |
Odpor (vpřed) | 0.007 Ω |
Odpor (zpátečka) | 0.014 Ω |
Use | Rc cars |
---|---|
Zone | 2,4 GHZ |
Number of channels | 2 |
Power supply | 4x AA batteries |
Telemetry | No |
Capacity | 3000 mAh |
---|---|
Weight | 400 g ± 5% |
Connector | Traxxas iD |
Power supply | USB-C |
---|---|
Charging current | 4 A |
Charging power | 40 W |
Number of NiMH / NiCd cells | 6 - 7 cells NiMH |
Dimensions | 42,0 x 33,0 x 24,5 cm |
---|---|
Weight | 3,760 kg |
Traxxas set of six M3x8 mm flat-head machine screws with hex-drive heads.
Traxxas set of six M2.5x8 mm countersunk machine screws with Phillips-drive heads.
Traxxas set of six 3x15 mm washer-head self-tapping screws with Phillips-drive heads.
Traxxas set of six M2.5x10 mm cap-head machine screws with hex-drive heads.
Traxxas set of six M2.5x8 mm cap-head machine screws with hex-drive heads.
Traxxas M3x10 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas 3x10 mm round-head self-tapping screws with Phillips drive heads. Set of six.
Traxxas M3x12 mm countersunk self-tapping screws with Phillips drive heads. Set of six.
Traxxas set of six M3x12 mm washer-head machine screws.
Traxxas set of six 3x30 mm washer-head self-tapping machine screws with Phillips-drive heads.
Traxxas M3x15 mm round-head machine screws with Phillips drive heads. Set of six.
Traxxas set of six M3x15 mm washer-head machine screws.
Traxxas M3x20 mm round-head machine screws with Phillips drive heads. Set of six.
Traxxas M3x23 mm round-head machine screws with Phillips drive heads. Set of six.
Traxxas M3x30 mm round-head machine screws with Phillips drive heads. Set of six.
Traxxas 3x6 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas M3x6 mm round-head machine screws with Phillips drive heads. Set of six.
Traxxas set of six M3x8 mm washer-head machine screws for motor mounts.
Traxxas set of six 3x8 mm washer-head self-tapping screws with Phillips-drive heads.
Traxxas M4x12 mm countersunk machine screws with Phillips drive heads. Set of six.
Traxxas M4x15 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M4x15 mm round-head machine screws with Phillips drive heads. Set of six.
Používáme soubory cookies k zajištění funkčnosti webu a s Vaším souhlasem i mj. k personalizaci obsahu našich webových stránek. Kliknutím na tlačítko „Rozumím“ souhlasíte s využívaním cookies a předáním údajů o chování na webu pro zobrazení cílené reklamy na sociálních sítích a reklamních sítích na dalších webech.